Teradek Bolt Pro 1000 3G-SDI/HDMI Receiver

by Teradek MFG# 10-0967

With highly refined software, new wireless radios, and a redesigned chassis, the Bolt Pro 1000 3G-SDI/HDMI Receiver from Teradek is a reliable and capable monitoring solution. This receiver includes metadata and timecode support, 3D LUTs, USB 3.0 GRAB Engine, dual inputs/outputs, is multicast capable, and offers manual frequency selection.

  • Receives visually lossless video signal up to 1000’ with no delay
  • 20 MHz channels
  • Two DFS channels operate interference-free
  • Small and light chassis allows the receiver to integrate into any rig unnoticed
  • Removable colored top plates easily identify which Bolt receivers work together
  • Rapidly reconnects during a dropped link once you move back into range
  • Ideal for use with MoVI and other gimbals
  • Built-in HDMI to SDI converter allows you to connect your on-camera monitor and video source via the same device
  • Reaches full range and potential right out of the box with new software that provides a robust wireless link
Video Output 1 x Micro-USB 3.0 
1 x BNC, 75 Ohms
1 x HDMI Type A
Video Delay Transmitter to Receiver: < 0.001 sec (when no video format conversion is enabled)
Color Sampling YCbCr = 4:2:2, 8-bit for SDI (10-bit without format conversion and FPGA v1.1.0 or later)
RGB 4:4:4 (HDMI out, 8-bit color)
Supported Resolutions 1080p 60/59.94/50/30/29.97/25/24/23.98
1080PsF 30/29.97/25/24/23.98
1080i 60/59.94/50
720p 60/59.94/50
576p 50 (via HDMI ports only)
480p 59.94 (via HDMI ports only)
480i (NTSC) / 576i (PAL)
Wireless Up to 1000' (304.8 m) line of sight

Non-DFS Frequencies:
5.19 to 5.23 GHz and 5.755 to 5.795 GHz

DFS Frequencies:
5.27 to 5.55 GHz and 5.67 GHz
RF Power 19 dBm EIRP (with two 5 dBi transmitter antennas)
Noise Rejection Can coexist with Wi-Fi and 5 GHz cordless phones
Interface OLED display with joystick navigation buttons
Audio Format Support: 48 kHz, 24-bit PCM
Material Milled aluminum
Mounting Multiple mounting options with 4-40 holes
Multiple mounting options with 1/4"-20 hole
Power 2-Pin LEMO 7 to 28 VDC
No internal battery
Consumption: 7.5 W
Dimensions 5.5 x 3.5 x 1.0" (14 x 8.9 x 2.5 cm)
Case: 12 x 9.0 x 4.5" (30.5 x 22.9 x 11.4 cm)
Weight 13.3 oz (376 g)
Packaging Info
Package Weight 2.7 lb
Box Dimensions (LxWxH) 7.8 x 7.4 x 4.1"