Teradek Bolt Pro 1000 SDI/HDMI Transmitter
by Teradek MFG# 10-0966
$3,590.00
Connect the Teradek Bolt Pro 1000 SDI/HDMI Transmitter to your camera and wirelessly transmit the uncompressed video signal to up to four separately available Bolt Pro 1000 receivers up to 1000' away. Even though the video is uncompressed, transmissions have no noticeable latency, making the Bolt a great solution for focus pulling. Either HDMI or SDI transmissions can be received and output by the receiver as HDMI or SDI signals (SDI receiver can only output SDI), for both consumer and professional equipment compatibility on both the transmitter and receiver end.
-
- Transmits visually lossless video up to 1000' with no perceptible delay
- 20 MHz channels
- Two DFS channels operate interference-free
- Small and light chassis allows the transmitter to integrate into any rig unnoticed
- Removable colored top plates easily identify which Bolt receivers work together
- Rapidly reconnects during a dropped link once you move back into range
- Ideal for use with motorized gimbal stabilizers
- Built-in HDMI to SDI converter allows you to connect your on-camera monitor and video source via the same device
| Video Input | 1 x BNC, SD/HD/3G-SDI 1 x HDMI Type A |
| Video Output | 1 x BNC, loop-through output |
| Video Delay | Transmitter to Receiver: <0.001 sec (when no video format conversion is enabled) |
| Color Sampling | YCbCr = 4:2:2, 8-bit for SDI (10-bit, without format conversion and FPGA v1.1.0 or later) RGB 4:4:4 (HDMI out, 8-bit color) |
| Supported Resolutions | 1080p 60/59.94/50/30/29.97/25/24/23.98 1080PsF 30/29.97/25/24/23.98 1080i 60/59.94/50 720p 60/59.94/50 576p 50 (via HDMI port only) 480p 59.94 (via HDMI port only) NTSC PAL |
| Wireless | Up to 1000' / 300 m line of sight Non-DFS Frequencies: 5.19 to 5.23 GHz and 5.755 to 5.795 GHz DFS Frequencies: 5.27 to 5.55 GHz and 5.67 GHz |
| RF Power | 19 dBm EIRP (with two 2 dBi transmitter antennas) |
| Audio | Format Support: 48 kHz, 24-bit PCM |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Power | 2-Pin LEMO 7 to 28 VDC Consumption: 7.5 W |
| Dimensions | 0.9 x 2.6 x 4.5" / 2.3 x 6.6 x 11.4 cm Case: 12 x 9.0 x 4.5" / 30.5 x 22.9 x 1.4 cm |
| Weight | 8 oz / 226 g |
| Packaging Info | |
|---|---|
| Package Weight | 4.65 lb |
| Box Dimensions (LxWxH) | 12.9 x 10.9 x 5.2" |